SVS-708-400 Surface Power Supply and SVS-709-400 Subsea Power Supply for ROVs

The SVS-708-400 Surface Power Supply and SVS-709-400 SubSea Power Supply provide smart power management capabilities that extend the available power and umbilical power transmission capabilities for Observation Class vehicles such as Blue Robotics BlueROV2, custom vehicles and many others.

The next-generation electronics included with the SVS-708-400 Surface unit enhances the capabilities of ROVs for demanding inspection and tooling operations. The SVS-708-400 Surface Power Supply displays:
• Output voltage
• Output current
• Line insulation resistance

The SVS-709-400 SubSea Power Supply has been designed from the ground up to exploit the latest in high power solid state electronic component that enable rapid response to the dynamic current draw of challenging ROV operations. This allows operation over a much broader voltage range with greatly improved reliability.

In addition to the standard output voltages (16, 24, and 48V) provided by the off-the-shelf VPSU configurations, the output voltages can also be configured to specific values as required for particular applications. The required output voltage can be specified when ordering a VPSU (SVS-709 series product).

For example, the 24V VPSU can be configured to output at any voltage in the range from 14V to 26.4V. (Similarly, the 48V VPSU can be configured to output in the range from 28V to 52.8V.)

In addition to customizing the output voltage, because of a severe shortage of the components that are used in the standard 16V VPSU design, we also provide a 16V system that is produced by adjusting the output of a 24V system to output anywhere in the range from 14V to 26.4V.

For any such adjusted output voltage, the available power from the VPSU will be in proportion to the ratio of the adjusted voltage to the standard voltage. For example, for a 24V supply rated for 2kW output which has been adjusted to produce a 16V output, the available power will be two thirds (16/24) of the rated power, namely 1333.33W.

The SVS-708-400 Surface Power Supply is available in 3kW or 6kW configurations. The SVS-709-400 SubSea Power Supply is available in 2kW, 3kW or 4kW configurations.

SVS-708-400 Surface Power Supply Features:

Output Power 3kW or 6kW
Output Current 7.5A or 15A
3kW System: Input Voltage: 200-240 VAC, 47-63 Hz; Input Current: 16A@230 VAC
6kW System: Input Voltage: 200-240 VAC, 47-63 Hz; Input Current: 32A@230 VAC
Output Voltage 400 VDC
Insulation Monitoring Megacon KPM169
Operating Temperature: – 20C to +65C
- Voltage
- Current
- Insulation Resistance Panel Meters
Dimensions 3U x 17″ D, 19″ W shipped in a shock-mount rack case for protection
Protection:
- Over Voltage
- Over Current
- Short Circuit
- Over Temperature
- Fan Failure

SVS-709-400 SubSea Power Supply Features:

Input Voltage: 160-420 VDC
Output Voltage: 16.5 VDC, 24VDC or 48VDC
Power Output: 2kW, 3kW, or 4kW
Operating Temperature: -20C to +70C in water
Output Power Configurations:
- SVS-709-400-2k-16: 2kW 16.5VDC 2×60 Amps
- SVS-709-400-2k-24: 2kW 24VDC 2×40 Amps
- SVS-709-400-2k-48: 2kW 48VDC 1×40 Amps
- SVS-709-400-3k-16: 3kW 16.5VDC 3×60 Amps
- SVS-709-400-3k-24: 3kW 24VDC 3×40 Amps
- SVS-709-400-3k-48/24: 3kW 48VDC (1×40 Amps) & 24VDC (1×40 Amps)
- SVS-709-400-4k-16: 4kW 16.5VDC 4×60 Amps
- SVS-709-400-4k-24: 4kW 24VDC 4×40 Amps
- SVS-709-400-4k-48/24: 4kW 48VDC (1×40 Amps) &24VDC (2×40)
- SVS-709-400-4k-48: 4kW 48VDC 2×40 Amps
600m depth rating
Physical Characteristics:
- SVS-709-400-2k: 3inch OD x 200mm (standard Blue Robotics enclosure)
- SVS-709-400-3k: 4inch OD x 200mm
- SVS-709-400-4k: 4inch OD x 200mm 3.5kg (air); 1058g (water); 985g (sea water)
Protection:
- Over Voltage
- Under Voltage
- Over Current
- Short Circuit
- Over Temperature